3D printing
3-Pack 3D Printer Glue Sticks — Strong Bed Adhesion for ABS/PLA/PETG (36g)
Product description
What you get: a three-pack of 36 g (about 1.27 oz) glue sticks designed for use with FDM/FFF printers.
Material and compatibility: the adhesive is based on polyvinylpyrrolidone (PVP), a water-soluble binder that does not emit strong odors while printing. It works with common filaments such as ABS, PLA and PETG and adheres well to a variety of build surfaces.
Supported build plates: suitable for textured and smooth PEI, glass plates, aluminum beds, flexible build sheets and other common print surfaces.
Use and cleanup: apply a light, even coat to the plate (warm bed recommended for best spread). When prints are finished the bond releases easily after cooling or by rinsing; residue wipes away with a damp cloth or is removable under running water. Isopropyl alcohol can also be used for thorough cleaning.
Yield: each 36 g stick is intended to cover about 100 prints depending on part size and how much is applied. With three sticks included, you have material for roughly 300 prints before needing more.
Pros
- Strong first-layer grip across many surfaces
- Water-soluble for simple cleanup
- Long-lasting: ~100 prints per stick
Cons
- Can be overly tacky if applied too thickly
- Needs periodic bed cleaning to avoid buildup
- Scent may be noticeable to some users
VerdictThese PVP-based glue sticks deliver reliable first-layer adhesion across a wide range of surfaces and filament types. The water-soluble formula makes removal and bed maintenance simple, while the 36 g size gives long runtime — each stick should cover roughly 100 prints depending on layer size and application. Ideal for hobbyists and classrooms who want fewer failed prints and easy cleanup, though
Reviews
-
Arlo Greiss 5/5
Better alternative to craft glue
I used to apply craft glue, but after costs rose I tried this specialized stick. It outperforms the old method and is more economical in my workflow. Now my prints adhere more reliably.
-
Girldad88 5/5
Very sticky — use sparingly
Extremely tacky, almost to the point of being too strong, but very effective. Pleasant scent and I’ll buy again.
-
KyTodd 4/5
My new go-to for every print
After switching from liquid adhesives, this stick type surprised me. It seems thicker at first, but after weeks of use my bed adhesion failures stopped. Consistent results and peace of mind during long prints.
-
Victor 5/5
Works well and cleans easily
Does the job and is easy to remove after printing.
-
Kimberli Howles 5/5
Converted after a second try
At first I thought it looked too thick, but using a lighter hand changed everything. No corner lifting and I didn’t need to reapply for two weeks of regular printing. Big fan now.
-
Sola 5/5
Works well, slight fruity scent
Apply with the bed heated or you’ll lay down too much. Rinses off easily and I no longer worry about small-part runs. There’s a fruity/floral note that fades once dry — not unpleasant but worth noting.
-
mystery book lover 5/5
Hasn't lost a print since I started
A real game changer for my build plate — I’ve run around 50 prints without a single failure. It sticks very well but still allows safe removal when cooled. I apply a light coat and clean the bed with isopropyl alcohol each morning; no gummy residue when used sparingly. Very pleased and will repurchase.
-
Rob 5/5
Saved my Christmas project
New to printing, we were having frequent lifts with the supplied adhesive. A thin layer of this solved the spaghetti issues immediately. It holds so well that delicate parts sometimes need warm water to release, so don’t over-apply. Clean the bed periodically to avoid head clogs.
-
Iona 5/5
Good item, thanks
Good product, does what it should — thanks.
-
Joaquin Suarez 5/5
Excellent quality
High quality product that matches the seller’s specifications perfectly.
-
Silo 5/5
Ridiculously strong adhesion
I was amazed — it fixed sudden adhesion failures that cleaning didn’t solve. Glue sticks were the missing step for me; they work exceptionally well.
-
LeifS 5/5
Effective for 3D printing
Very effective for 3D printing — works exactly as advertised.
Comments
No comments yet.
Sign in or sign up to comment.