Networking
2m SC/APC–SC/APC OS2 Single‑Mode Fiber Optic Patch Cable
Product description
High‑speed single‑mode patch cable: This product is a 2 meter (7 ft) single‑mode fiber optic patch cable with SC/APC connectors on both ends. The fiber core/cladding dimension is 9/125 µm (OS2), designed for long‑reach, low‑loss optical links and 10G applications at 1310 nm and 1550 nm wavelengths.
Connector and jacket details: Both ends are polished with the angled SC/APC interface to reduce back reflection and provide repeatable mating. The outer jacket is LSZH (Low Smoke Zero Halogen) for reduced toxic emissions in enclosed environments. The overall cable diameter is approximately 2.0 mm, making it easy to route in tight spaces and cable managers.
Performance and uses: Rated for 10GBASE‑L (1310 nm) and 10GBASE‑E (1550 nm) applications, this patch lead is intended for connections between patch panels, network switches, optical network terminals (ONTs) and wall junctions. Typical use cases include data centers, enterprise LANs, telecom rooms and commercial installations where SC/APC terminations are required.
Quality assurance and support: The manufacturer has 15 years of focus on fiber optics and performs factory testing on each cable to verify insertion loss and overall quality. Items ship tested to meet standard insertion loss tolerances. A customer support team is available to answer installation or compatibility questions.
Pros
- Low‑loss OS2 single‑mode fiber suitable for 10G links
- LSZH jacket reduces toxic smoke in enclosed spaces
- Compact 2.0 mm diameter eases routing in patch panels
Cons
- Fixed 2m length may be longer or shorter than some needs
- Thin jacket requires careful handling to avoid kinks
- Must match SC/APC terminations and fiber type on both ends
VerdictThis 2m OS2 SC/APC patch cable delivers reliable single‑mode connections with low insertion loss and an LSZH jacket for safer indoor use. It’s compact, easy to route, and supports 10G optical links—well suited for rack, patch panel, and ONT hookups. Good performance and factory testing make it a solid option when matching SC/APC terminations is required.
Reviews
-
Paul Stasney 5/5
Stable connection, a bit long for my setup
Connected to my regional fiber feed with no speed loss. Cable was longer than I needed, so I coiled the excess.
-
Megan 5/5
Performs reliably over time
No drop in internet quality. Arrived quickly and has continued to work without issues.
-
Alfredo F Rivera 5/5
Improved throughput after swap
Shorter than my previous 6 ft lead but increased throughput. Fast delivery and straightforward to hook up—be sure to match connector polish and fiber type.
-
Kyle Beeson 5/5
Simple and effective
Easy installation and functions exactly as expected.
-
Lisette Ramirez 5/5
Matched my router port
Connected perfectly to my fiber router's SC/APC port—exactly what I needed.
-
Ronald wiemelt 5/5
Clean optical signal
Provides a clear optical link with no noticeable faults.
-
Gus Smedstad 5/5
Works well with T‑Mobile fiber setup
Used a 0.5 m jumper between the wall box and ONT for T‑Mobile fiber. Stable connection and about 2 Gbps up/down.
-
Vinesha Lewis 3/5
Does the job but handle with care
Product matched the description. The exposed cord is short—about 1 ft—so couplers may be needed. Jacket is slim and needs careful handling, but it works when properly connected.
Comments
No comments yet.
Sign in or sign up to comment.