DJ
Betopper 54×4W RGBW LED Par Stage Light — 2-Pack Fixtures
Product description
This listing is for a pair of Betopper PAR-style stage lights sold as a 2-pack. Each fixture contains 54 LEDs rated at 4 watts apiece (54×4W) in a 4-in-1 RGBW configuration, combining red, green, blue and dedicated white emitters to produce richer hues and a pure white output.
In high-CRI mode the white LEDs deliver a color-rendering index above 90, so skin tones and objects look natural under the beam. The combined output reaches roughly 5,500 lumens per unit, producing a broad wash suitable for dance floors, small stages, photography sets, or streaming studios.
The housings are solid metal with sturdy hanging yokes and heavy-duty construction designed for repeated rigging. Each fixture includes an IEC-style power input and a power output for daisy chaining, and the units are cooled by an internal fan. Rated life is around 50,000 hours and they’re specified to operate between −20 °C and 40 °C.
Control options include DMX for full integration, plus automatic programs and sound-activated modes for simpler setups. Multiple pre-set color scenes are available for quick looks, and the fixtures work well as wash lights, strobe effects, or basic stage illumination. Note that DMX cable and some mounting hardware may not be standardized to every rig; check accessories compatibility before installation.
Pros
- High CRI white mode for accurate color rendering
- Strong output (about 5,500 lm) from 54×4W LEDs
- Multiple control modes including DMX and sound-activated
Cons
- Some users reported mismatched mounting hardware
- DMX cable and connector choices may not match every setup
- Fan noise may be noticeable in very quiet studio use
VerdictA powerful, low-cost LED wash solution for DJs, venues, and studios. The two-pack delivers bright, accurate colors with flexible DMX and standalone modes; build quality and service are solid, though some minor hardware and cable quirks have been reported.
Reviews
-
Brandon Bryant 5/5
Vivid stage colors
Transformed our show visuals — bold, saturated hues. Controlled easily from desktop DMX.
-
Rider Ramirez 5/5
Quick support turnaround
Initial shipment missed a unit, but support resolved it promptly and sent the remainder. Lights perform well and communication was professional.
-
Richard 5/5
Perfect for our band
Four fixtures cover our six-piece setup with bright, lively colors. One had a small defect but support sorted it. Planning to add more.
-
Phillip Montague 5/5
Durable and dependable
I use several of these — well packed, sturdy, and consistently bright. Simple to operate and reliable.
-
Mikey 5/5
Quality, brightness, and support
Chose these over another par for higher LED count and smoother output on stage. Support answered questions well; we ordered additional units.
-
DadoMultimedia 5/5
Powerful professional fixture
Very intense output (~5000 lm). RGBW with 54 LEDs and CRI>90 white produce clean whites and a wide color palette. DMX-ready and well built for stage or studio.
-
VRam 4/5
Bright but missing DMX cable
Good output and overall build. No 3 ft DMX cable included. Power out uses an IEC-style lead so daisy-chaining needs the proper cable.
-
DJ Schmidi 5/5
Huge brightness upgrade
Replaced older 7×10W pars and these are at least three times brighter with clean beams and no halos. Very solid metal build and thick yokes.
-
Mark S. 3/5
Sturdy unit, hardware issue
Heavy metal housing and IEC in/out work well. DMX is fine but buttons lack auto-scroll. Received legs and screws that didn’t thread correctly.
Comments
No comments yet.
Sign in or sign up to comment.